91062, 91064 - ALARM ANNUNCIATOR PANEL
91060-021 - ALARM INTERFACE PANEL
91055-002 - ALARM EXTENSION PANEL

Accurate Electronics Inc.'s Alarm Annunciator System monitors up to sixty-four (64) separate alarms (or more with an Extension Panel). The system provides visual, audible, and remote indication of alarm status. The alarm equipment is designed for use as a stand-alone system or as an enhancement to a computer controlled alarm surveillance system.

The system can be installed in remote locations such as unmanned offices, microwave repeater sites, etc.

The system is compatible with COMAS, CPMS, SCOTS, TASC, TCAS, and other E-Telemetry systems. It is electrically compatible with inputs and controls of E2A DAS (Digital Alarm Scanner), SAC (Satellite Alarm Communicator), SAT (Satellite Alarm Transmitter), etc.

The system consolidates alarm related equipment and easily interfaces with ESS alarm systems.

4xxx0002 - K-PAD ATTENUATOR

The K-Pad attenuator provides fast, flexible, highly concentrated level setting for voice and data circuit applications. K-Pad values range from 0.0dB to 35.0dB in 0.2dB increments.

8057 - CAMERA CONTROLLER

The Controller recieves DTMF telephony tones and translates your commands to various visual and audio monitoring equipment. The commands can operate cameras, lenses, pan-n-tilts, tape recorders, video cassette recorders (VCRs), camcorders, etc. The command tones can be intialed to the controller on site, remotely from short distances, or a base station.

8063 - COMPUTER TRACKBALL SWITCH

Allows personal computer operator to switch easily between a mouse and a trackball by merely using the switch on the unit. There is no need to plug / unplug the cables from the computer while choosing between the two.

8052 - DATA COMBINER (6 PORT RS-232)

The Data Combiner allows up to six (6) DTE devices to be connected to a common DCE device such as a modem. Packaged on a 19" aluminum panel to allow for relay rack mounting.

5017, 5018 - DTMF CONTROLLER

The DTMF test set unit includes a DTMF source with keypad and an audio monitor. The DTMF source has switchable output levels of -16.0 dB, -8.0 dB and 0.0 dB. The audio monitor provides an adjustment audio output of either the receive or transmit line or both. LEDs also monitor the recieve and transmit lines providing a visual indication when signals are present. Fuse protected - 1/2A front panel mounted.

8050 - FIBRE OPTIC MODEM SHELF

Twelve (12) ST Connector Couplings are centrally mounted within the shelf unit. Panel cut-outs on the base and both sides allow access to the ST Connectors. Mounts in 19" and 23" racks.

8051 - FIBRE OPTIC PATCH SHELF

Twelve (12) Female to Female Gender Changers are centrally mounted within the shelf unit. Panel cut-outs on the base and both sides allow access to the Gender Changers. Mounts in 19" and 23" racks.

8048 - MODEM SHELF

Please contact AEI for a description.

6200 - ORDERWIRE

Designed for a SONET 64Kbs digital interface. Provides voice and data bridging for both directions (east/west) of transmission in a SONET ring or linear topology. Provides voice in a selective signaling system and data for RS-232 Asynchronous communications between locations.

TEST ACCESS DEVICE

Please contact AEI for a description.

8056 - V.35/RS-232 ASYNC/SYNC ADAPTER

The unit is used in LAN-WAN connectivity, video conferencing and other high speed applications where one vendor's DCE is required to communicate with another vendor's DTE. The unit is DCE / DTE switchable allowing a V.35 host to interface with a synchronous RS-232 modem or a synchronous RS-232 terminal to talk to a V.35 CSU / DSU.