4xxx0002 - K-PAD ATTENUATOR
(xxx=dB value, ie 41860002 = 18.6 dB)
The K-Pad attenuator provides fast, flexible, highly concentrated
level setting for voice and data circuit applications.
Typical applications include: interfacing carrier systems,
interfacing carrier with cable, interfacing dissimilar equipment or
trunk types and use in CCIS installations.
K-Pad values range from 0.0dB to 35.0dB in 0.2dB increments.
1223 (30000106) - SINGLE K-PAD MOUNTING
The mounting provides atenuation (pads) for interchangeable
voice and data circuit level setting. The mounting accepts horizontally one
miniature attenuator K-Pad (model 4xxx0002).
Input/output is through 14" leads. There is a 6dB insertion loss with no K-Pad.
1227 - E-SIGNAL BAY ATTTENUATOR MOUNTING
The mounting provides attenuation (pads) for interchangeable
voice and data circuit level setting. The mounting accepts horizontally twenty (20)
miniature attenuator K-Pads (model 4xxx0002).
Ten (10) circuits, available in 600 or 900 ohm configuration, and the unit
adds 20% to signal unit capacity with no increase in bay space.
1228 (30000206) - DOUBLE K-PAD MOUNTING
The mounting provides atenuation (pads) for interchangeable
voice and data circuit level setting. The mounting accepts horizontally two
miniature attenuator K-Pads (model 4xxx0002).
Input/output is through 14" leads. There is a 6dB insertion loss with no K-Pad.
1250 - ATTENUATOR PAD ADJUST MODULE
Utilizing a type 400 card with 56-pin gold contacts which insert into shelves
with rear female edge connectors. Accessible from the front is a ten (10) position
edge connector which accepts K-Pads ( model 4xxx0002). The unit is passive.
15000 - RECEPTACLE PAD (Fixed Loss Square Pads)
The Receptacle Pad attenuator provides fast, flexible, highly concentrated level
setting for voice and data circuit transmission applications. The miniature attenuator
is a balanced suqare pad, which mounts directly onto the insulation displacement
pins of a 66-type connecting block.